Step-by-step instructions for using the Epson L3156 Resetter

1. Download the Epson L3156 Resetter

2. Unpack the archive with the program on your Windows computer.

3. Find Adjprog.exe in the unpacked files and run it:

4. In the window that opens, press the “SELECT” button:

5. In the next window, select the L3156 of your printer (if the program is compatible with only one device, the choice of L3156 will be blocked):

6. In the same window, select the port by which the device is connected to the computer (when the device is connected and working properly, the device L3156 will be written in the port name) and confirm the selection with the “OK” button:

7. Click the “Particular adjustment mode” button:

8. In the window that opens, find and select the “Waste ink pad counter” item, then confirm the selection with the “OK” button:

9. The absorbent pad service menu opens. To check if the “pad” counter is full, check the box next to the “Main pad counter” item and click the “Check” button:

10. The program calculates the data on the fullness of the “diaper” and displays them:

11. In the case when the percentage of the counter has reached 100%, it is necessary to reset the waste ink counter. To do this, check the box next to the “Main pad counter” item and click the “Initialize” button:

12. The program will connect to the printer and reset the waste ink counter. A pop-up window will then appear instructing you to restart the printer. Reboot the printer and click “OK”.

13. Check if the service counter is full after performing a reset. To do this, check the box next to the “Main pad counter” item and click the “Check” button:

14. If the reset procedure is successful, the counter will be zero:

https://printservice.best/en/product/epson-l3156-adj/